Home Drone Parts And Accessories BTG Carbon Fiber Propeller & Gears Guard Protector & Drive Bearings &...

BTG Carbon Fiber Propeller & Gears Guard Protector & Drive Bearings & Main Axles & C-clips for Parrot AR Drone 2.0

3
SHARE
BTG Carbon Fiber Propeller & Gears Guard Protector & Drive Bearings & Main Axles & C-clips for Parrot AR Drone 2.0

BTG Carbon Fiber Propeller & Gears Guard Protector & Drive Bearings & Main Axles & C-clips for Parrot AR Drone 2.0

BTG Carbon Fiber Propeller & amp; Gears Guard Protector & amp; Drive Bearings & amp; Main Axles & amp; C-clips Parrot AR Drone 2.0

  • BTG article!
  • 4 Pcs x Glass Fiber Gear Guard
  • 8 pieces x Drive Bearings
  • 8 pieces x C-clips, 4 pcs x Carbon Fiber propeller
  • Some screws & Spacer

Package contains all parts in the picture!

List Price: $ 29.99

Reviews

False Advertising October 22, 2015

 

This review is from: BTG Carbon Fiber Propeller & Gears Guard Protector & Drive Bearings & Main Axles & C-clips for Parrot AR Drone 2.0 (Toy)
False Advertising. Picture shows 8 screws and 8 metal shafts. There is only a pack of 4. Very misleading. I can not install the other two screws because I do not have any screws. I read the description where she changed into a few screws to say. But why does the image with eight screws? I bought this thinking that the few screws meant 8 that I see in the picture.

The propellers are of good quality and balanced May 8, 2015

 

This review is: BTG Carbon Fiber Propeller & Gears Guard Protector & Drive Bearings & Main Axles & C-clips for Parrot AR Drone 2.0 (Toy)

The propellers are of good quality and balanced. The gears and shafts are good. The acceleration guards are a little heavier than I expected. The tolerances between the gears posts and cores for the propellers are NG, the aluminum tubes are too small. I destroyed two gears installing the sleeves try to install them on the VSA messages. I was expecting a press fit, I do not expect impossible. The wear ring outer dimensions are too small, and not tight in their seats. The most striking feature is the small e-clips are very poor quality: Half broke during the installation, and one of them broke during use, in combination with clearance fit of the bearings has resulted in the loss of some bearings. I ended up having to gears, bearings, and e-AGAIN clips that were manufactured to buy better tolerances, and had a better quality steel. Not happy.

Missing parts. Stay away and buying another vendor February 10, 2016

 

This review is from: BTG Carbon Fiber Propeller &  Gears Guard Protector & Drive Bearings & Main Axles & C-clips for Parrot AR Drone 2.0 (Toy)
I have nicer Carbon fiber guards bought and as for props, well their completely different from what I have replaced and really not sure how a man would assemble them there are not enough mount stems only four not 8.
Pro … Bearings are much quieter than the originals

Share your thoughts with other customers: all 24 customer reviews …

More Drone Parts And Accessories

LEAVE A REPLY

Please enter your comment!
Please enter your name here