Owoda 4Pcs CNC Metal Motor Protect Mount Base Quick Release Plates Strengthening Anit-Crack Kit for DJI Phantom 2 3 RC Drone Quadcopter Spare Parts
- Suitable for DJI Phantom 3
- Avoid bursting of lower shell
- Helps to restore the lower bowl with cracks
- Easy to install
Description: Suitable for DJI Phantom 3 EUR avoid cracking the lower shell
Helps restore the lower bowl with cracks
Easy to Install
Package include:
4 x CNC Metal engine Mount;
16 x motor mount screws;
8 x body screws;
1 x screwdriver. Workwear
Installation instructions: 1. Place the drone down on a table |
2. Use to remove a 2mm hex driver and mounting screws 4 pcs engine of a motor.
the engine will now loose in the hole, trying to keep the engine tuned as it was in the hole, do not turn over or move the drone until the new part is installed
3. Use a Torx 8 bit the removal of the 2 pieces of half shell
screws
4. place the motor protector in the existing screw holes (it is designed to be a kind of snap light in place to hold it)
5. Drop 4 of the engine to be mounting screws in the motor mounting holes and two of the longer thinner screws into the shell openings
6. Begin lightly each of the screws in a criss-cross pattern, if everything is well prepared, you will feel resistance as the screws begin to wire in the motor shell
7. if a screw just running in place, this means that you have aligned the engine and pulling him off a little, like this happens, remove the screws and look down into the holes and push and turn the engine a little until you see the screw holes line-up
List Price: $ 27.75
Looking for more drone accessories? Check it out.
